Featured
How To Drain All Coolant From Engine
How To Drain All Coolant From Engine. Drain the system again, flush once more with water, before filling the system with prestone coolant/antifreeze. Most cars have a coolant drain on the side of the engine block of the engine!

Ive flushed it 3 times by now and everytime ive drained the cooling system by removing the bottom radiator hose. Tighten the drain plug when coolant has stopped flowing. Most radiators have a drain plug on the bottom tank the engine block also has a drain plug.
This Will Extend The Life Of Key Components In The System.
How to flush a coolant system in your car diy with scotty kilmer. Locate a few in your area and give them a call. This will make sure there is no pressure in the system and it will allow air to enter the system while draining.
Place A Pan Under The Drain Plug To Catch Old Coolant.
Turn off your car and drain out the distilled water. It is not critical to open the drain plug. 3) run engine till thermostat opens (keep heater on during this step).
Drain Out The Coolant In A Bucket.
This will extend the life of key components in the system. I did a partial flush (drain, pour water till clear water, add and run with water). I ran water through and it came out fine and clean.
Final Thoughts The Steps To Drain Coolant From The Engine Block Will Differ Slightly Depending On The Car.
Drain the system again, flush once more with water, before filling the system with prestone coolant/antifreeze. Release the pressure inside the cooling system by pushing down and slowly twisting the cap counter clockwise. Ive flushed it 3 times by now and everytime ive drained the cooling system by removing the bottom radiator hose.
How To Fill Coolant In Car.
Most radiators have a drain plug on the bottom tank the engine block also has a drain plug. Finally, after you get the wanted results. Loosen the drain plug and allow coolant to flow.
Comments
Post a Comment